specifcations subject to change without notice. please check our website for latest information. shielded high srf inductors C 0603ps document 266-1 document 266-1 revised 08/17/09 dcr 4 srf 5 part l 10% 2 q min 3 max typ isat 6 irms 7 number 1 (h) at 1 mhz (ohms) (mhz) (a) (a) 0603ps-781kl_ 0.78 15 0.24 475 0.55 1.30 0603ps-102kl_ 1.0 15 0.26 390 0.40 1.00 0603ps-182kl_ 1.8 15 0.54 155 0.39 0.70 0603ps-222kl_ 2.2 15 0.75 245 0.33 0.60 0603ps-272kl_ 2.7 15 0.75 127 0.33 0.55 0603ps-332kl_ 3.3 15 0.88 72 0.32 0.50 0603ps-392kl_ 3.9 15 1.00 72 0.27 0.48 0603ps-472kl_ 4.7 15 1.08 64 0.26 0.47 0603ps-562kl_ 5.6 15 1.23 51 0.25 0.41 0603ps-682kl_ 6.8 15 1.37 39 0.23 0.40 0603ps-822kl_ 8.2 20 1.43 30 0.22 0.39 0603ps-103kl_ 10 20 1.60 30 0.21 0.38 0603ps-153kl_ 15 20 1.92 22 0.16 0.35 0603ps-223kl_ 22 20 2.96 16 0.13 0.27 0603ps-333kl_ 33 20 5.63 12 0.10 0.20 0603ps-473kl_ 47 20 5.69 12 0.10 0.18 1. when ordering, please specify termination and packaging codes: 0603ps-473klc termination: l = rohs compliant silver-palladium-platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape (7500 parts per full reel). 2. inductance measured at 100 khz, 0.1 vrms, using a coilcraft smd-a fxture in an agilent/hp 4263b lcr meter. 3. q measured on an agilent/hp 4291 with an agilent/hp 16193 test fxture. 4. dcr measured on a micro-ohmmeter and a coilcraft ccf840 test fxture. 5. srf measured using an agilent/hp 8753d network analyzer and a coilcraft smd-d test fxture. 6. dc current at which the inductance drops 10% (typ) from its value without current. 7. current that causes a 40c temperature rise from 25c ambient. 8. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. core material ceramic/ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 26.4 C 27.9 mg ambient temperature C40c to +65c with i rms current, +65c to +105c with derated current storage temperature component: C40c to +105c. packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles temperature coeffcient of inductance (tcl) +50 to +150 ppm/c moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 2000/7 reel; 7500/13 reel plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth pcb washing only pure water or alcohol recommended ? higher srf than our other power inductors ? high inductance with tight tolerance ? excellent current handling for a part this size ? coilcraft, inc. 2011
specifcations subject to change without notice. please check our website for latest information. document 266-2 document 266-2 revised 08/17/09 power chip inductors - 0603ps series typical l vs current a b c max max max d e f g h i j 0.102 0.082 0.071 0.049 0.030 0.060 0.013 0.040 0.025 0.025 inches 2,59 2,08 1,80 1,24 0,76 1,52 0,33 1,02 0,64 0,64 mm irms derating 0.1 1 10 100 1 000 11 0 100 1000 current (ma) inductance (h) 6.8 h 3.3 h 33 h 1 h a b ov erall c te r minal wraparound: appro x 0.012/0,30 both ends i i j f g h recommended land p attern e ter minal d 35 30 25 20 15 10 5 0 0.1 11 0 frequency (mhz) q factor 10 h 3.3 h 6.8 h 1 h 33 h typical q vs frequency typical l vs frequency 1 10 100 1000 inductance (h) 0.1 1 10 100 0.1 frequency (mhz) 33 h 3.3 h 1 h 6.8 h -40 -20 02 04 06 08 0 100 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 pe r cent of rated rms i 25c ? coilcraft, inc. 2011
|
